Before customizing the roller conveyor, we first need to determine the roller conveyor parameters as well as the choice of roller, roller mounting method. To ensure that the goods can be transported smoothly, at least three rollers must be in contact with the conveyor at any point of time.
Before customizing the roller conveyor, we first need to determine the following roller conveyor parameters:
1, the length, width and height of the object to be conveyed;.
2, The weight of each conveyor unit; and
3, the condition of the bottom of the conveyed object.
4, there is no special working environment requirements.
5, the conveyor belongs to the powerless type or motor-driven type.
Selection of roller:
1, the length of the roller selection: different width of the goods should be selected for the appropriate width of the roller, in general, the use of "conveyor + 50mm".
2, the drum wall thickness and shaft diameter selection: according to the weight of the conveyed material is evenly distributed to the contact roller, calculate the required load-bearing capacity of each roller, so as to determine the wall thickness and shaft diameter of the drum.
3、Materials and surface treatment of the roller: According to the different conveying environment, determine the material and surface treatment of the roller.
4、Choose the installation of the roller: according to the specific requirements of the overall conveyor, choose the installation of the roller: spring pressure into the type, the inner teeth of the shaft type, the full flat tenon type, through the axis of the pin hole type and so on.
In order to ensure that the goods can be transported smoothly, there must be at least three rollers at any point in time to maintain contact with the conveyor. Flexible bags should be palletized if necessary.
