Industrial production for the productivity of society, with the assembly line production operations gradually become the dominant mode of production, assembly liane equipment is also more and more extensive range of applications. In the assembly line equipment * common is the belt conveyor equipment, and the working principle of the belt conveyor is very simple: by the driving device to tighten the conveyor belt, the central frame and rollers composed of the conveyor belt as traction and bearing components, through continuous transportation of bulk materials or pieces of products. Although the principle is simple, the production is not simple.
First of all, the belt conveyor line is a kind of non-standard equipment, it needs to be designed by engineers according to the production needs and plant space design drawings. According to the drawings to produce the conveyor line frame.
The frame of the belt conveyor line is usually assembled by aluminum profiles, because aluminum profiles do not need welding, light weight and good hardness, beautiful and anti-rust, the surface does not need to be painted. Aluminum profiles of each type are saw cut according to the drawing requirements and assembled with bolt and nut corner pieces.
Then install the roller, belt conveyor line installed at one end of the drive roller, used to provide running power; the other end of the installation direction roller, used to control and adjust the direction.
Speaking according to the good roller conveyor line installed on the aluminum frame, in the bottom of the frame to install the foot. At the same time, the height of the whole belt conveyor line can be adjusted properly by the foot cup to meet the production needs.
Install adjusting screws at both ends of the frame of the belt conveying line, which can adjust the conveying slope of the belt conveying line.
Install the electric control box and governor, the position of the governor is adjacent to the electric control box, so as to facilitate the connection of the two circuits. The speed controller can adjust the conveying speed according to the production needs. This is an adjustable slope of the belt conveyor line is completed, of course, before leaving the factory needs to be tested and test run.
